our swiss φθηνα ρολογια are all in now.
We are pleased to present below all posts tagged with 'Hardware'. If you still can't find what you are looking for, try using the search box.
As previous, I purchased an 8.4” LVDS display from ICOP, the kit manufacturer. In this article I cover getting the display working working. There were some issues for which I am got great support from ICOP in resolving.
Display: LCD-AU084-U-SET with touch / LCD-AU084-SET without touch
Target System: Vortex86DX- Spark Kit .. in enclosure. This has VDX-6326-256 single board computer
The display was mounted on the top of the box using some plastic mounts. This required routing of the LVDS and the backlight signals through the lid. The backlight circuitry was mounted internally on the lid.
The LVDS cable is provided with the kit. The connects to the top left of the display and to J31 on the board.
The short backlight power cable is fixed to the bottom left of the board. This connects to the supplied backlight power supply.
The backlight part number is QF38V6.4
The backlight requires a 12V supply that is not avail ...
This is a "how-to" on using a USB touch panel with an LVDS LCD panel. In paticular it covers using the touch panel available from ICOP for the 8.4" display as supplied by ICOP and used with the embedded Spark kit.
2010 embeddedSPARK Challenge hardware