Raspberry PI 3
Issue: Can pair a Windows 10 device with an Arduino device and communicate over RFCOMM. But although can pair two Windows 10 devices over Bluetooth Serial, I can’t serially transmit between them: No serial port for OutGoing end.
Read the rest of entry »
Windows 10 IoTCore, as implemented on the Raspberry Pi 2 (RPI2) initially came with no WiFi or Bluetooth (BT) connectivity. These were then added as USB dongles but with a limited listed of hardware that worked. RPI3 has built in WiFi and BT. What is the state of play with IoTCore connectivity with the RPI now? Are there any issues?
As I discussed in a previous blog article, the Raspberry PI3 Bluetooth driver for Windows 10-IoT-Core becomes errant and misses updates when the update rate is high. This is a known issue with the RPI. This problem does not exist other Windows 10 systems including the Dragonboard running IOT-Core. This article again discusses the problem and presents a workaround that does work. Includes how to disable/enable a driver using devcon.
After an absence from significant IoT-Core activity, whilst working on a significant phone app (as blogged here) I’m back in the IoT-Core space. Things have changed for the better so here goes. This blog covers my experiences with getting a RPI3 going with the latest Technical Preview build. Tools are now available to simplify setup and there is now a Remote Viewer. As a test UWP app, I have used (after a small modification) the Icons app on Codeplex, Universal Windows 10 SDK App Icons app as blogged in a previous blog. The app was modified because popups (as in MessageBox) are not supported in IoT-Core (Use thereof can cause an app crash in later OS versions). This feature change is covered.